3V-M-PEO Gas Panel

​

The 3V-M-PEO manual gas panel is designed for use with non-toxic reactive gases that may have properties that could cause asphyxiation in high volumes, create a flammable atmosphere or be detrimental to the environment due to release during purging. These can be wall mounted or installed into a gas cabinet at the discretion of the end user.  In order to minimise the risk, the process gas is purged with a suitable inert gas to reduce the hazard prior to cylinder exchange. After cylinder exchange, the gas panel is purged with a suitable inert gas to remove the atmospheric contamination prior to the re-introduction of the process gas. An air operated Regulator Inlet Valve, with a manual override fitted to the gas panel for purging purposes, enhances the gas panel to allow for shutdown in the event of an emergency.  A 0.4 micron pre-filter is fitted as standard along with a 10 bar burst disc for over pressure protection on the outlet side (for gases with a cylinder/vapour pressure > 120 psig) Further optional enhancements can be found on the datasheet.